Allied Telesis SwitchBlade x3100 Series - Page 197

Logging Procedures Introduction
1-167
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
Example
CREATE LOG OUTPUT=terminal DESTINATION=CLI FORMAT=SUMMARY
MINORFA-
CILITY
The log facility that minor syslogs are sent to. The pos-
sible values are 0-7, indicating LOCAL0-LOCAL7 or
DEFAULT.
LOCAL2
INFOFACIL-
ITY
The log facility that informational syslogs are sent to.
The possible values are 0-7, indicating LOCAL0-
LOCAL7 or DEFAULT.
LOCAL2
FILE unit:filename-pattern - the specific SD unit
and the pattern (in 14.2, the SD unit on the active or
inactive CFC unit can be specified.
FORMAT Allows users to specify the format of the management
logs. Valid formats include the following:
FULL - Displays the entire contents of the management
log including log type, date and time, severity, sequence
number and message body.
MSGONLY - Displays only the management log bodies.
SUMMARY - Displays a one-line summary of the man-
agement log. The summary includes the log type, date
and time and log sequence number.
Option Description Default Value