Software Reference for SwitchBlade x3100 Series Switches (Preface)
i-4
Simplex/Duplex for CFC - Chapter 1 - 1.10.3
Provides 200G/400G throughput in Simplex/
Duplex
For the SBx3112, in simplex mode, you can-
not provision a line card in the unused slot.
Log Filtering and Output -
Chapter 1 - 1.11
Color/Pattern LED Chapter 1 - 1.12 Solid color is a stable state.
Flashing pattern is a transient state.
Energy Savings Mode
(no power to LEDs) Chapter 1 - 1.13
For CFC, all except power status are not lit
For Service Modules, all port LEDs are not lit
LED Shelf Test - by ECO button or CLI command
Chapter 1 - 1.13
All lamps illuminated, then either ON (ECO-
MODE exit) or off (ECOMODE enter)
Fan Cooling - Automatic - Chapter 1 - 1.15.3
High temperature alarm - Chapter 1 - 1.15.3.5
Auto-populate from profile when card inserted
(AUTOPROV) - Chapter 1 - 1.16.4
User-Created Profiles - Chapter 1 - 1.16.5
NMS Profile Support - Chapter 1 - 1.17.4
Admin/Operational States - Chapter 1 - 1.17.5
Chapter 2 -
Interface Man-
agement
Auto-negotiation of GE24POE interfaces -Chapter
2 - 2.3
SBx3100 does not support SPEED=1000 in
combination with AUTO=OFF
Customer or Network Direction - GE - Chapter 2
- 2.3
Customer or Network direction (XE) - Chapter 2
- 2.4
Chapter 3 -
Power over
Ethernet (PoE)
Power over Ethernet (PoE) - Chapter 3 - 3.2 PoE is optional, and defaults to ‘enabled’. If
the connected device does not support PoE,
the user must disable PoE to turn off the
alarm.
GE24POE can face upstream or downstream GE24POE can provide upstream LAG
TABLE i-2 Feature / Document Roadmap for Release 14.2 for the SBx3112
Feature
Group Feature and Reference Notes
To Next Page
Loading...
