Software Reference for SwitchBlade x3100 Series Switches (Preface)
i-6
Chapter 6 -
Access and
Security
Egress Queueing Chapter 6 - 6.2.2 Strict priority (no Weighted Round Robin)
Classifier Match Rules - Chapter 6 - 6.3.1 SBx3100 does not support INNERVPRIOR-
ITY, INNERVID, TCPFLAGS, IPTOS, ETH-
FORMAT
Classifier Actions - Chapter 6 - 6.3.2.2 SBx3100 does not support MOVEPRIOTO-
TOS, MOVETOSTOPRIO
Access Control List (ACL) - Chapter 6 - 6.4
Ingress Counts and Metering - Chapter 6 - 6.5 SBx3100 has increased capacity
Egress Rate limiting - Chapter 6 - 6.6 SBx3100 and iMAP have different values for
rate increments and burst sizes.
Priority Queueing - Chapter 6 - 6.7 Supports 8 queues
TACACS+ Chapter 6 - 6.8
Radius - Chapter 6 - 6.9.2
Port Authentication - 6.9 Supports 802.1X, Single Host
ARP Filtering -Chapter 6 - 6.11 XE4 and GE24 card support
Local ARP Discard - Chapter 6 - 6.12 Complete MACFF in a future release
Chapter 7 -
Network Man-
agement
DHCP Relay Mode - Chapter 7 - 7.2.3
DHCP Relay Snooping Mode- Chapter 7 - 7.2.4
Auto-Ageing and IP Filter Removal- Chapter 7 -
7.2.5
SNMP - Chapter 7 - 7.3 SNMPv1, SNMPv2c
LLDP - Chapter 7 - 7.4
RMON Statistics - Chapter 7 - 7.5.2 Based on RFC3176
Controlling RMON - Chapter 7 - 7.5.4
IP Statistics - Chapter 7 - 7.6
BFD - Chapter 7 - 7.7
TABLE i-2 Feature / Document Roadmap for Release 14.2 for the SBx3112
Feature
Group Feature and Reference Notes
To Next Page
Loading...
Need help?
General
