Configuration Guidelines Configuring the GE24POE Card
3-17
Software Reference for SwitchBlade x3100 Series Switches (Power over Ethernet (PoE))
SHOW POE CARD
Syntax
SHOW POE [ CARD={ slot-list | ALL } ]
Description Displays the power usage for the shelf and/or supported cards. If no card is selected then
all cards are shown.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
officer SEC>> SHOW POE CARD=ALL
--- POE Power Status ---
Shelf Power Total..................... 1200W
Shelf Power Requested................. 1017W
Shelf Power Available................. 183W
Shelf Power Actual.................... 888W
Shelf Power Threshold................. 99%
Card Allocated Requested Actual Min Voltage Max Voltage
---- ------------ ---------- ------- ------------ ------------
0 53W 30W 24W 50.0V 57.0V
1 51W 16W 9W 50.0V 57.0V
2 500W 510W 439W 50.0V 57.0V
3 182W 168W 168W 50.0V 57.0V
7 51W 0W 0W 50.0V 57.0V
8 51W 30W 26W 50.0V 57.0V
10 51W 16W 15W 50.0V 57.0V
11 261W 247W 207W 50.0V 57.0V
Option Description Default Value
CARD The slot number for the PoE card (module) in the shelf.
slot-list - a comma-separated or a dash range of slots
ALL - shows all applicable cards on the shelf.
To Next Page
Loading...
Need help?
General
