Configuring the Forwarding Database Introduction
4-9
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
8
show switch
--- Switch Configuration ------------------------------------------------------
Learning.............................. On
Ageing Timer.......................... On
Ageingtimer........................... 300
Age-Only FDB Clear............... On <<Notice this is now "On"
Number of SM Ports.................... 196
Number of NM Ports.................... 24
Number of HVLAN....................... 2
Number of Standard VLAN............... 261
Number of UFO VLAN.................... 14
Hash Select .......................... ALL
.
Disable interface 0.23 again
9
disable interface 0.23 force
Verify that the MAC address now remains -- where as, it was immediately removed before
10
show switch fdb
--- Switch Forwarding Database ---
Slot VLAN Interface ID MAC Address Status
----------- ----------- --------------- ---------------------- ---------------
0 420 0.0 00:00:CD:0E:B1:F0 Dynamic
0 420 0.0 00:0C:25:00:FC:59 Dynamic
0 2100 0.0 00:0C:25:00:FC:59 Dynamic
0 3511 0.23 00:00:02:00:0B:99 Dynamic <<still present!
11 512 11.23 00:02:02:00:AB:15 Dynamic
11 512 11.23 00:02:02:00:AB:AF Dynamic
11 512 11.23 00:02:02:00:AC:05 Dynamic
11 512 11.23 00:02:02:00:BC:A7 Dynamic
TABLE 4-1 Configuration Procedure for Clear FDB (Dynamically)
Step Command Description/Notes
To Next Page
Loading...
Need help?
General
