Allied Telesis SwitchBlade x3100 Series User Manual

Configuring LAG Introduction
4-29
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4
show interface 3.0 full
--- GE Interfaces ---
Interface.......................... 3.0
Type............................... GE
State.............................. UP-UP-Online
Description........................ <none>
Remote ID.......................... <none>
External Profile................... <none>
Card Type.......................... GE24SFP
Provisioning
Provisioning Profile............ AutoProv (*)
Direction....................... Network
Auto Negotiation................ On
Speed........................... 1 Gbps
Duplex.......................... Half
Flow Control................ On
Remote Monitoring............... On
Actual
Direction....................... Network
Physical Address................ EC:CD:6D:03:6E:EF
Speed........................... 1 Gbps
Duplex.......................... Half
Flow Control............... On
VLAN Information
Acceptable Frame Types.......... All
Ingress Filtering............... On
TPID............................ 0x8100
TAGALL.......................... Off
Dynamic MAC Learning Limit...... 0
Untagged VLAN................... 1
Untagged VLAN.............. 10
Packet Statistics
Input Output
------------- -------------
Octets.......................... 136620 233398572
Unicast Packets................. 90 153754
Discarded Packets............... 0 0
Errored Packets................. 0 0
Prepare the 3rd interface
TABLE 4-3 Configuration Procedure for Creating a Cross-Card LAG
Step Command Description/Notes

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English