Allied Telesis SwitchBlade x3100 Series User Manual

Configuring LAG Introduction
4-41
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
SET SWITCH HASH SELECT
Syntax
SET SWITCH HASH
SELECT={ MAC | IP | MACANDIP | IPANDPORT | ALL }
Description This command applies to the SBx3112, and controls the global hash selection setting. The
SHOW SWITCH command includes a new field to display the current hash selection set-
ting, and the SHOW LAG command uses the existing “Select Criteria” field to show the
current hash selection setting.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example SET SWITCH HASH SELECT=MAC
Option Description Default Value
SELECT Refer to Ta bl e 4 -6 .

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English