Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring BPDU Cop
Software Reference for SwitchBlade x3100 Series Switches (Layer Two Switching)
4-110
HELLOTIME Determines how often the switch sends Hello messages
containing spanning tree configuration information if it is
the root bridge, or is trying to become the root bridge
in the network.
2
MAXAGE Determines the maximum time that dynamic STP con-
figuration information is stored in the switch, before it is
considered too old, and discarded.
20 seconds
TXMAX The maximum number of BPDUs that can be transmit-
ted on an interface per second.
MAXHOPS The maximum number of bridges a BPDU can travel
through before aging out.
MSTREGION The MST region name for the bridge, which is used in
conjunction with REVISIONLEVEL and VLAN to MSTI
associations to define the MST region for the bridge.
REVISION-
LEVEL
MST revision level for the bridge, which is used to define
the MST region for the bridge.
CISCOCON-
FIGURA-
TIONDIGES
T
Specifies the Cisco MST configuration digest to be
backed up or restored from a text config file.
CISCOLEAR
NEDINTER-
FACE
The interface that the Cisco MST configuration digest
will be learned on.
PROTOCOL Identifies which version of the Spanning Tree Protocol
to run, and should be made based upon what version of
Spanning Tree is being run on all the other bridges in the
network.
- original STP
- Rapid Spanning Tree (RSTP)
- STP compatible version of RSTP.
- MSTP
- CISCO_COMPATIBLE_MSTP
RSTP
Option Description Default Value

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English