Allied Telesis SwitchBlade x3100 Series - Page 540

Introduction Configuring IGMP
Software Reference for SwitchBlade x3100 Series Switches (Internet Group Management
Protocol (IGMP))
5-8
FIGURE 5-2 Video Multicasting Using IGMP Snooping
The following procedure shows the commands used to create the IGMP video multicasting configuration
shown in Figure 5-2.
TABLE 5-1 Configuration Procedure for IGMP Snooping
Step Command Description/Notes
Create the video VLAN
1
create vlan video vid 512 Creates a VLAN named “video” with an ID of
512.
Create the network interface for IGMP
2
set interface 0.22 ge direction network Sets GE interface 0.22 to the Network direc-
tion.
SBx3112
SBx3100
0.22
11.11
11.10
512
A
C
B
1
2
3
4
A
C
= Devices
= Links
1
4
Set top box
iMG616
Set top box
512
= vlan_video