EasyManua.ls Logo

Allied Telesis SwitchBlade x3100 Series - Page 59

Allied Telesis SwitchBlade x3100 Series
940 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Password Recovery Introduction
1-29
Software Reference for SwitchBlade x3100 Series Switches (Setting Up the Switch)
----------------------------------------------
Software Version Information
----------------------------------------------
Build name : ATI 200G Central Fabric Controller
Build type : Lab-Only Build
Revision : 14.1.0.GAMMA.20100303
Built on : Wed 03/03/2010 at 04:10 AM
Built by : Loadbuild Prime
Environment: ccb_R14.1_int
Baseline : R14.0.1_2010_03_01_RC4
Target : cfc200
Options : OFFICIALBUILD=TRUE
Brand : ATI
----------------------------------------------
Boot ROM Version Information
----------------------------------------------
Boot ROM : ATI 200G Central Fabric Controller Boot Loader
Revision : 14.1.g.02.20100414
Built on : Wed 04/21/2010 at 09:50 AM
Built by : dlayne
Environment: dlayne_R14.1_2
Baseline : R14.0_4_16_2010_preRC9
BuildTarget: bootcfc200
----------------------------------------------
VxWorks Version 5.5.1 for MV78100 CFC200 LE MMU ARCH 5
BSP version 1.2/1.3.5_000
Copyright Wind River Systems, Inc., 1984-2002
Memory Size: 511 MB
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
********************
* WARNING: Password reset mode has been activated for this reboot.
********************
System Time is 2010-04-21 07:11:29.428
Last reset occurred due to a power interruption.
System initializing...
/tffs/ - Volume is OK
Initialization completed successfully (14.1.0.GAMMA.20100303)
User Access Verification
Username: officer
Password:
10. Enter the user ID officer (or manager).
Username: manager
11. Enter the user password officer (or friend).
Password: (typed password is hidden from view)
12. The user is logged into the system. System user data can be re-configured and stored in the database. Other
configuration data remains intact.
13. Note that there is a security risk if the default user ID and password are enabled. It should be modified as
soon as possible or the default “officer” and “manager” accounts should be replaced by a different SECU-
RITY OFFICER account.

Table of Contents

Related product manuals