Introduction Configuring ACL
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-36
4
ADD ACCESSLIST stb_range INTERFACE=eth:10.0
SHOW ACCESSLIST stb_range
--- Access Lists ---------------------------------------------------------
Name Interfaces Rule Action Fields
--------- -------------- ---- ------- ------------------------------- ---
stb_range ETH:[10.0] 1 DENY APPLICATION=NETBIOS
2 PERMIT IPSOURCE=172.16.5.0
SOURCEMASK=255.255.255.240
3 PERMIT PROTOCOL=2054
-- DENY
Deprovision the ACCESSLIST
DELETE the ACCESSLIST from interface or set of interfaces
5
DELETE ACCESSLIST stb_range INTERFACE=eth:10.$
DESTROY the ACCESSLIST
6
DESTROY ACCESSLIST=stb_range
Destroy Access List(s) (Y/N)? Y
SHOW ACCESSLIST=stb_range
Error (041154): Access List(s) "stb_range" do not exist.
a. To ensure that only ARP packets from the permitted IP addresses were allowed to pass, the ARP Filtering feature
would be used, as described in 6.11.1.
TABLE 6-5 Configuration Procedure for ACL (Continued)
Step Command Description (Optional)
To Next Page
Loading...
