Introduction Configuring ACL
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-40
ADD ACCESSLIST INTERFACE
Syntax
ADD ACCESSLIST=accesslistname INTERFACE={ type:id-range | id-range
| ifname-list }
Description Adds an ACCESSLIST to one or more INTERFACEs. Only one ACCESSLIST can exist on
a given INTERFACE. Also, INTERFACEs can support only a limited number of RULEs
(and CLASSIFIERs).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example ADD ACCESSLIST stb_range INTERFACE=eth:10.0
Option Description Default Value
ACCESSLIST The ACCESSLIST name that already exists.
INTERFACE The interfaces that are to associated with the ACCESS-
LIST.
To Next Page
Loading...
Need help?
General
