Configuring a TACACS+ Server Introduction
6-83
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
DELETE RADIUS SERVER (SEC)
Syntax
DELETE RADIUS SERVER={ ipaddress-list | hostname-list | ALL }
Description Used to remove RADIUS servers from the system. Once removed, user authentication
requests are no longer sent to those servers.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example DELETE RADIUS SERVER=ALL
Option Description Default Value
SERVER ipaddress-list
hostname-list
ALL
To Next Page
Loading...
