Allied Telesis SwitchBlade x3100 Series - Page 645

Configuring a TACACS+ Server Introduction
6-85
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
ENABLE RADIUS SERVER (SEC)
Syntax
ENABLE RADIUS SERVER={ ipaddress-list | hostname-list | ALL }
Description Used to enable one or more RADIUS servers for use in user authentication requests.
Once enabled, the RADIUS server(s) are used for future user authentication requests.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
ENABLE RADIUS SERVER=10.10.10.10
Option Description Default Value
SERVER ipaddress-list - comma-separated list of IP addresses.
hostname-list - comma-separated list of IP addresses.
ALL - Enable all configured RADIUS servers.