To Next Page

To Previous Page

Introduction Configuring a TACACS+ Server

Software Reference for SwitchBlade x3100 Series Switches (Access and Security)

6-88

Example SET RADIUS SERVER 10.10.10.10 RETRIES=5 TIMEOUT=1

AUTHENTI-

CATION

Allows the user to turn the Authentication functionality

ON or OFF for the specified server.

OFF

ACCOUNT-

ING

Allows the user to turn the Accounting functionality

ON or OFF for the specified server.

PRIORITY Allows the user to specify the order in which servers

are used. The lower the number, the higher the priority.

If more than one server is set to the same priority, they

are looped through in no specific order. (The order will

follow what appears in the SHOW RADIUS command,

but this could change after a system reboot.)

Since this is a new parameter for 14.2, any existing

radius servers will default to 1 after upgrading.

TYPE Specifies specify whether RADIUS Server can be used

for port authentication (802.1X), user login authentica-

tion (LOGIN), or both.

Option Description Default Value

Allied Telesis SwitchBlade x3100 Series User Manual

Questions and Answers: