Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring Port Authentication
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-122
SETDEFAULTS DOT1X
Syntax
SETDEFAULTS DOT1X [ACCOUNTING]
Description This command is used to reset 802.1X-based Port Authentication settings in the switch
to their default. If no parameters are specified, all settings are reset. ACCOUNTING is
set to NONE.
Options N/A
Example
SETDEFAULTS DOT1X

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English