Allied Telesis SwitchBlade x3100 Series - Page 699

Configuring SSH Introduction
6-139
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
3
SET SSH SERVER REQUIREDAUTH=password,pub-
lickey,
ALLOWEDAUTH=password,publickey
LOGINTIMEOUT=600
Verify the SSH Server configuration and status.
4
officer SEC> SHOW SSH SERVER
--- Secure Shell Configuration ---------------------------
SSH Version.......................... SSH-2
Server Enabled....................... Yes
Port................................. 22
Host Key ID.......................... master
Host Key bits........................ 512
Login Timeout (seconds).............. 600
Allowed Authentications.............. publickey,password
Required Authentications............. publickey,password
----------------------------------------------------------
TABLE 6-21 Configuration procedure for SSH (Continued)
Step Command Description