Introduction Configuring SSH
Software Reference for SwitchBlade x3100 Series Switches (Access and Security)
6-144
CREATE SSH KEY LENGTH (SEC)
Syntax
CREATE SSH KEY=keyname LENGTH=length [ FILE=filename ] [ TYPE={
3DESCBC } ] [ DESCRIPTION=description ]
Description Creates a new HOST_KEY or loads a public key file into the SSH key database.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
CREATE SSH KEY=master LENGTH=512 TYPE=3DESCBC DESCRIPTION=”SSH Master Host key”
Option Description Default Value
KEY The name of the key
LENGTH Length of key being generated. Between 512 and 1024,
multiples of 64.
FILE The name of the public key file to be imported
TYPE The type of key to create. Only 3DESCBC (3des-cbc) is
supported
3DESCBC
DESCRIP-
TION
The key description. A maximum of 23 characters
To Next Page
Loading...
