Introduction Configuring DHCP Relay
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-18
FIGURE 7-6 Sample DHCP Relay Snooping Configuration
The following procedure shows the commands used to create a simple DHCP Relay instance configured for
snooping, as shown in Figure 7-6.
TABLE 7-3 Configuration Procedure for DHCP Relay Snooping
Step Command Description/Notes
Create a VLAN for snooping
1
create vlan dhcpSnoopRal vid 3200 Creates a VLAN named “dhcpSnoopRal” with
an ID of 3200.
Create DHCP Relay instance and assign remote ID
SBx3112
SBx3100
0.20
0.21
3200
1
= Links
1
2
CPE
3200
= DHCP Snooping VLAN
DHCP Server
2
To Next Page
Loading...
