Configuring DHCP Relay Introduction
7-45
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
SHOW DHCPRELAY
Syntax
SHOW DHCPRELAY [ ={ dhcpname-list | MAIN | ALL } ] [ FULL ]
Description This command displays information about the DHCP Relay Agent for one or interfaces. If
more than one interface is specified (or if no interface is specified) the following informa-
tion will be displayed, including the list of DHCP Servers, cumulative DHCP Relay Statis-
tics, and list of interfaces that are configured to run DHCP Relay.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
E135 - officer SEC>> SHOW DHCPRELAY
--- DHCP Agent Summary ------------------------------------------------------
DHCP Cumulative
Statistics
------------------ --
Discover.......... 0
Offer............. 0
Request........... 0
Decline........... 0
Ack............... 0
Nack.............. 1
Release........... 0
Inform............ 0
--------------------------------------
DHCP System-Wide
Settings
------------------ --------
CID Order......... VIDLAST
Option Description Default Value
DHCPRELAY The name of the DHCP instance
dhcpname-list - list of specific DHCP instances
MAIN - the default DHCP instance
ALL - all DHCP instances
MAIN
FULL Full information is shown for the specified command
entered.
Condensed
To Next Page
Loading...
Need help?
General
