Allied Telesis SwitchBlade x3100 Series User Manual

Introduction Configuring LLDP
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-92
SHOW LLDP COUNTER
Syntax
SHOW LLDP COUNTER [ INTERFACE={ type:id-range | id-range | ifname-
list | ALL } ] [ FULL ]
Description Allows the user to view the runtime data (local system LLDP counters) for each inter-
face specified. Packets counted include frames as well as Type-Length-Value (TLV) infor-
mation elements, which are variable in length. Counters include: Receive Frames (Total,
with Errors, Discarded); Received TLVs (Discarded, Unrecognized Transmitted); and
Frames (Total).
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
E134 - officer SEC>>>> show lldp counter
--- LLDP Counters ---
Transmit Received Port Frames Received Port TLVs
Interface Total Total Errors Discarded Discarded Unrecognized
--------- -------- ------ ------ --------- --------- ------------
0.0 757 757 0 0 0 0
0.1 0 0 0 0 0 0
0.2 0 0 0 0 0 0
2.0 0 0 0 0 0 0
2.1 0 0 0 0 0 0
2.2 0 0 0 0 0 0
2.3 0 0 0 0 0 0
3.22 759 758 0 0 0 0
10.16 0 0 0 0 0 0
10.17 0 0 0 0 0 0
Option Description Default Value
INTERFACE A logical representation of one or more physical ports;
the INTERFACE for which RMON data is enabled
type:id-range - the type of available ports, such as
ETH:7.0 or a range (ETH:8.0-8.9)
id-range - used with type (type:id) to query the physical
ports; the numerical identifier of the interface
ifname-list - list of interface names, if not numerical
ALL -
If the INTERFACE parameter is not pro-
vided, then all interfaces are displayed.
ALL
FULL The runtime information is displayed in tabular format,
unless the FULL parameter is provided.

Allied Telesis SwitchBlade x3100 Series Specifications

General

Brand	Allied Telesis
Model	SwitchBlade x3100 Series
Category	Switch
Language	English