Introduction Access of MIB Statistics Using an SNMP Browser
Software Reference for SwitchBlade x3100 Series Switches (Network Management)
7-116
SHOW IP CONNECTIONS
Syntax
SHOW IP CONNECTIONS [ ={ TCP | UDP } ]
Description Displays all information in the TCP and UDP tables.
Options The following table gives the range of values for each option that can be specified with
this command and a default value (if applicable).
Example
E134 - officer SEC>>>> SHOW IP CONNECTIONS
--- TCP Connections --------------------------------------------------------
Id Local IP Local Port Remote IP Remote Port State
----- --------------- ------------ --------------- ------------ -----------
0 0.0.0.0 23 0.0.0.0 0 LISTEN
1 10.52.71.84 23 10.52.18.230 1834 ESTABLISHED
2 10.52.71.84 23 10.52.19.13 1279 ESTABLISHED
--- UDP Connections --------------------------------------------------------
Id Local IP Local Port
----- --------------- ------------
0 0.0.0.0 0
1 0.0.0.0 67
2 0.0.0.0 161
3 0.0.0.0 1024
Option Description Default Value
CONNEC-
TIONS
TCP - TCP only
UDP - UDP only
Both types
To Next Page
Loading...
Need help?
General
