2.6 Warning information and symbols used in the user manual
2.6.1 Hazard classes
The following hazard identifications and symbols are used to mark particularly important information:
DANGER
Identification of immediate threat holding a high
risk of death or serious injury if not
avoided.
WARNING
Identification of immediate threat holding a medium
risk of death or serious injury if
not avoided.
CAUTION
Identification of immediate threat holding a low risk of minor or moderate physical inju-
ry if not avoided.
NOTE
Identification of a threat holding a risk of material damage if not avoided.
2.6.2 Hazard symbols
General hazard
Suspended load
Electrical voltage
Hot surfaces
2.6.3 Prohibition signs
No switching; it is forbidden to switch
the machine/plant, assembly on
2.6.4 Personal safety equipment
Wear body protection
2.6.5 Recycling
14 CM-CAN ACU 04/13
To Next Page
Loading...
