CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Ethernet IP Module - CLI and Telnet Operation MN/CDM570L.IOM
14–51
Selection Entry Description
Upgrade To U Determines which installed software package that the IP Module or base
modem firmware will overwrite when upgrading with a new software
package. The possible options are:
0 – Oldest : Overwrite the oldest software package based upon date.
1 – Image1: Overwrite the software package loaded into the first slot in
permanent storage.
2 – Image2: Overwrite the software package loaded into the second slot in
permanent storage.
Codecast Multicast
Address
M Multicast address used by VLOAD to upgrade the modem firmware and
param file via streaming multicast. Must match the address specified in
VLOAD.
PARAM Image C Identifies the PARAM file that is loaded on bootup. The options are:
1 – Last saved Parameter file
2 -Factory – uses the internal, hard-coded factory default parameters.
Statistics T Displays the Statistics Menu page.
Event Log E Displays the Event Log page.
Database Operations D Displays the Database Operations page.
Reset R Reboots the modem (includes the IP modem and base modem). It has the
same logical effect of power-cycling the unit.
Diagnostics G Displays the Diagnostics page.
M&C Interface F Used for base modem communications debugging
To Next Page
Loading...
