Comtech EF Data CDM-570 - PARAM Files

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–32
E.6 PARAM Files
This section gives more detail about the possible values of various parameters in the PARAM file.
Parameter File Tag Values Associated with Parameter
SYS_WORKING_MODE
Possible values are:
Router Mode
Managed Switch Mode
EASYCON_MCAST_MODE
Enabled
Disabled
HDR_REFRESH_UDP_RTP1 Decimal Value of 1…600
HDR_REFRESH_UDP Decimal Value of 1…600
HDR_REFRESH_ALL_OTHERS Decimal Value of 1…600
PAYLOAD_REFRESH Decimal Value of 1…600
TELNET_TIMEOUT Decimal Value of 1…60 Minutes
QOSMODE
Possible values are:
Rule-Max/Pri Mode
Rule-Min/Max Mode
DiffServ Mode
DYNBUF_LATENCY Decimal value of 200 to 5000 mSec.
Rt#0 …. Rt#nnn
Route table entries Rt#0 is the first entry and can go up to 256 entries.
[No need to read this from param file, use RTG]
ROUTE_HDLC_ADDR_SAVE Corresponding HDLC Addresses for EthernetÆSat entries. [No need to read this from param file, use RTG]