Comtech EF Data CDM-570 - Snmp Communities

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Front Panel Operation MN/CDM570L.IOM
5–10
(CONFIG: Remote Control) Ethernet: SNMP
SNMP: Communities Traps
(◄ ►, ENT)
Use the ◄ ► arrow keys to select the Communities or Traps configuration menu.
(CONFIG: Remote Control) Ethernet: SNMP Æ Communities
SNMP Communities:
Read Write (◄ ►, ENT)
Use the
◄ ► arrow keys to select the SNMP Communities Read or Write configuration
submenu.
(CONFIG: Remote Control) Ethernet: SNMP Æ Communities
Æ Read
Read Community: (◄ ►,▲ ▼)
public
(CONFIG: Remote Control) Ethernet: SNMP Æ Communities
Æ Write
Write Community: (◄ ►,▲ ▼)
private
To edit the SNMP Read or Write Community strings: First, use the
◄ ► arrow keys
to select a character to edit, and then use the
▲ ▼ arrow keys to edit that character.
Note that only the first 20 characters on the bottom line are available.
All printable ASCII characters are available with the exception of the backslash ‘/’
(ASCII code 92) and tilde ‘~’ (ASCII code 126).
Press ENTER once the string is composed – all trailing spaces are removed from the
string upon entry.
(CONFIG: Remote Control) Ethernet: SNMP Æ Traps
Traps: Community Version
IP Addr#1 IP Addr#2 (◄ ►)
Use the
◄ ► arrow keys to select Community, Version, IP Addr#1, or IP Addr#2, and
then press ENTER.