CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Ethernet IP Module - CLI and Telnet Operation MN/CDM570L.IOM
14–36
14.2.7 Vipersat Configuration Page
This page is displayed only if the optional Vipersat feature is enabled.
Activate the Vipersat Configuration page from the Main Menu page.
Figure 14-23. Vipersat Configuration page
The Vipersat Configuration page contains the following options/fields:
Selection Entry Description
STDMA Mode T
Used only when CDM-570/570L is used in a Vipersat system.
Refer to the Vipersat User Manual for complete information.
Automatic Switching A
Unit Role R
Expansion Unit E
Bandwidth Group ID B
Unit Name N
Multicast Management IP
Address
M
Multicast VMS Management IP
Address
V
Managing IP Address I
Path Loss Data Multicast
(PLDM)
P
Dynamic Power Control Config C
Set Home State Parameters H
To Next Page
Loading...
