Comtech EF Data CDM-570 - Redundancy Queries

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–24
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Codecast
Multicast Address
CCA= Multicast IP
Address in
xxx.xxx.xxx.xxx
format
Command or Query.
Set the Code cast multicast address, through which the modem can receive the
software updates via vLoad application. Only Multicast address in the range
224.xxx.xxx.xxx To 239.xxx.xxx.xxx are allowed. There are some reserved multicast
addresses which cannot be used.
This cannot be deleted.
CCA=
CCA!
CCA?
CCA=xxx.xxx.xxx.
xxx
(see description of
arguments)
Unit Up Time N/
A
String value Query only.
Displays the unit up time in days, hours, minutes & seconds.
Example: >0001/uut=0 days 0 hours 13 mins 15 secs
N/
A
UUT?
UUT=sssssss
String.
(see description of
arguments)
E.5.6 Redundancy Queries
Parameter
Type
Command
(Instruction
Code and
Qualifier)
Arguments for
Command or
Response to
Query
Description of Arguments
Response to
Command
Query
(Instruction Code
and Qualifier)
Response to
Query
Redundancy State N/
A
1 byte, value of 0
or 1
Query only.
Unit returns the redundancy state of the unit, where
0=Offline
1=Online
Example: RED=1 (which is Online)
N/
A
RED?
RED=x
(see description
of arguments)