E–1
Appendix E. CDM/CDD NMCS PROTOCOL –
REV 1.0
E.1 Revision History
Date Rev Author Comments
10/4/2004 Draft 1.0 Wallace Davis Created for Internal Distribution
3/1/2005 Draft 1.1 Bryan Wilcutt Modifications for implementation
6/27/2005 Rev 1.0 Bryan Wilcutt Released revision
11/10/2005 Rev 1.0 Harish Talanki Modifications
E.2 Introduction
This appendix defines the Remote Control-based interface used for the CDM/CDD family of Comtech EF Data products. The primary
interface is to be Telnet; however, other interfaces may adapt to the CiM implementation, programmatically, via specific API calls.