Comtech EF Data CDM-570 - Optional Argument Lists; End of Packet

CDM-570/570L Satellite Modem with Optional IP Module Revision 12
Appendix E MN/CDM570L.IOM
E–7
E.4.3.7 Optional Argument lists
In order to enforce atomic reads and writes and well as allow for checking related parameter for validity, multi-argument lists will have the
following format:
• Arguments are positioned in fixed length format (see specification for each argument)
• ‘|’ Is used to separate different argument values from each other.
E.4.3.8 End Of Packet
Controller-to-Target: This is the ‘Carriage Return’ character (ASCII code 13).
Target-to-Controller: This is the two-character sequence ‘Carriage Return’, ‘Line Feed’ (ASCII code 13, and code 10).
Both indicate the valid termination of a command.