ESAB Cutting Systems
CROSSBOW Page 113
4.26.1 Operating Overview – Shape Library
Main steps for creating a shape or nest from the Shape Library.
1. Select the desired shape from the shape library Main Screen.
2. Enter the required dimensions in the Shape Evaluation Screen. Enter nest
parameters if necessary. Verify all parameters using the
F6
APPLY function
3. Press the
ESC
key to exit the Shape Evaluation Screen. The shape is temporarily
stored in memory.
4. Press the
F3
key to activate Edit Mode. The newly generated program appears in
the edit screen.
5. Press the
F3
key, SAVE function, to give the program a file name and store it in
program storage memory. Once saved, the file may be run in the Auto Mode.
To Next Page
Loading...
