ESAB CROSSBOW - Manual Mode Screen Overview

ESAB Cutting Systems
CROSSBOW Page 94
4.19 Manual Mode Screen
From the Main Menu, press【F2】to select MANUAL:
Figure 71: Manual Mode Screen
Number Description
1 Feed Rate Override Percentage (Manual Jog Speed)
2 Program Name
3 Cutting Process Status Indicators
4 Additional Function Key Indicators
5 Input/Output Status Indicators
6 Operating Parameters
7 Machine Coordinates
8 Mode/Status Indicator / Prompts
9 Program Coordinates
10 Program Graphics Display Area
4.19.1 SPEED
The Manual Mode interface is the same as the Auto Mode interface, with the difference that the Feed
Rate Override Percentage and resulting speed shown are for the Manual Jog Speed. The jog speed is
the result of the Max Jog Speed (see Setup Menu) multiplied by the Feed Rate Override Percentage.
1
4
5
6
8
9
10
3
2
7