ESAB CROSSBOW - United States

ESAB Cutting Systems
CROSSBOW Page 18
1.5.2 United States
ANSI
• ANSI Z49.1 Safety in Welding and Cutting
American Welding Society
• AWS C5.1 Recommended Practices for Plasma Arc Welding
• AWS C5.10/C5.10M:2003 Recommended Practices for Shielded Gases for Welding and Plasma
Arc Cutting.
• AWS C5.2 Recommended Practices for Arc Cutting.
• AWS SP Safe Practices.
Compressed Gas Association
• CGA E-1 Standard for industrial gas hose/fittings.
• CGA SB8-2004 Use of oxyfuel welding and cutting apparatus.
• CGA SB11-2004 Use of rubber welding hose.
• CGA P-1 Precautions for safe handling of compressed gases in cylinders.
OSHA
• OSHA 29 CFR 1910 General Safety
• OSHA 29 CFR 1910.1026 Toxic and Hazardous Substances
• OSHA 3373-10 2009 Hexavalent Chromium
National Fire Prevention Association
• NFPA 51B Standard for fire protection in use of cutting and welding procedures.
• NFPA 51 Standard for installation and operation of oxygen - fuel gas systems for welding and
cutting.
• NFPA 70 2008 National Electric Code.
• NFPA 79 Electrical standard for industrial machinery.
• NFPA 484 Standard for combustible metals.
• NFPA 654 Standard for the prevention of fire and dust explosions from the manufacture,
processing, and handling of combustible particulate solids.