ESAB CROSSBOW - Page 12

ESAB Cutting Systems
CROSSBOW Page 12
envelope of equipment.
• Follow lockout-tagout procedures before servicing to prevent inadvertent startup.
• Stay clear of rails and cutting table during operation.
• Keep hands clear of moving components.
FLYING DEBRIS HAZARD.
Hot spatter can burn and injure eyes.
• Wear goggles to protect eyes from burns and flying debris generated during operation.
CRUSH/PINCH HAZARD.
Moving machine and lifter can crush or pinch.
• Stay clear of torch during machine operation.
• Ensure others do not enter the machine’s work area during operation.
• Do not operate machine with any protective covers removed.
ELECTRICAL SHOCK HAZARD.
Electrical shock can cause serious injury or death.
• Do NOT touch plasma torch, cutting table, or cable connections during plasma operation.
• Turn off ALL power before touching or servicing plasma system components (i.e. plasma torch,
plasma power source, or electronic enclosures).
• Do not touch live electrical components.
• Keep all panels and covers in place when machine is connected to power source.
• Insulate yourself from workpiece and electrical ground by wearing insulated gloves, shoes, and
clothing.
• Keep gloves, shoes, clothing, work area, and equipment dry at all times.
• Follow lockout-tagout procedures before servicing.
SPARK HAZARD.
Heat, weld spatter, and sparks can cause fire and burns.
• Do not cut near combustible material.
• Do not cut containers that have held combustibles.
• Do not have combustibles (e.g. lighters or matches) on your person at any time.
• Wear correct eye protection and gloves.
• Wear correct eye protection, gloves and flame-retardant clothing that covers all exposed areas.
RADIATION HAZARD.
Plasma arc rays can injure eyes and burn skin.
• Wear correct eye and body protection.