ESAB CROSSBOW - Page 3

ESAB Cutting Systems
CROSSBOW Page 3
Preface
The Crossbow is a portable CNC cutting machine supplied by ESAB Cutting Systems. It may be
equipped with a single oxy-fuel cutting torch, a single plasma cutting torch, or both. It is designed to
provide years of dependable, accurate, repeatable part cutting, with a high degree of reliability, ease of
service and operation.
There are optional features and configurations available which may or may not be included in this
manual. In addition, more capabilities and features may be added in the future, which are not covered
in this manual. ESAB Cutting Systems reserves the right to change or add features and capabilities
without notice. Before operating the machine, one should become familiar with this manual in its
entirety, with special attention to the SAFETY section.
The equipment described in this manual is potentially hazardous. Use caution when installing,
operating, and maintaining this equipment.
The purchaser is responsible for the safe operation and use of all products purchased, including
compliance with all applicable standards in the country of use. See standard ESAB terms and
conditions of sale for a specific statement of ESAB’s responsibilities and limitations on liability.
Information in this document is subject to change without notice. This manual is for the convenience
and use of the cutting machine purchaser. It is not a contract or any obligation on the part of ESAB
Cutting Systems.