About Facsimile Information Services
151
Fax
4
About Facsimile Information Services
For information about subscriptions and advanced operating procedures, contact the
corresponding facsimile information service.
Using the Receiver
1
Pick up the telephone.
2 Select [On-hook (Manual Send/
Receive)] on the [On-hook/Others]
screen.
3 Select [Manual Receive].
4 Select [Alphanumeric] or [Symbol].
5 Specify the fax number of the
facsimile information service.
Important • Specify the fax number with
the numeric keypad, Address
Number, or One Touch
buttons. You cannot use the
Address Book.
Note • When the line type is set to a pulse line, [Tone (:)] does not appear.
• When you are using a dial line, select [Tone (:)] if you want to send out touch-tones (for a
service requiring the use of a pulse line).
• Some types of services cannot be used even if you set the machine to send out touch-tones.
6 When the machine connects to the service, you will hear voice prompts. Follow the
voice prompts to enter the required numbers.
7 When input is finished, press the <Start> button.
Note • The online indicator on the control panel lights and reception begins.
8 Replace the telephone.
Important • Be sure to replace the telephone properly. Otherwise, the line will remain in the busy state.
To Next Page