Fuji Xerox Document Centre C360 - Step 5 Saving the Scanned Data

Scanning Procedure
159
Scan
5
Step 5 Saving the Scanned Data
When scanning to mailbox, you import the document that is stored on the machine’s
mailbox into your computer. Importing can be done in the following ways:
Import from an Application
Use a network scan driver.
Import Using Mailbox Viewer 2
You can import using Fuji Xerox’s application software, Mailbox Viewer 2.
Import Using CentreWare Internet Services
Uses CentreWare Internet Services to import.
For information about each of these modes, refer to "Importing Scanned Data" (P.217).