17 Appendix
492
Appendix
17
Specifications
This section lists the specifications of the Document Centre C450/C360/C250. In the
interests of product development, product specifications and external appearance are
subject to change without prior notice.
For the latest information, contact our Customer Support Center.
Main Unit and Copier Specifications
Type Console Type
Color support Full color
Scan resolution 600 × 600 dpi (23.6 × 23.6 dots/mm)
Output resolution 600 × 600 dpi (23.6 × 23.6 dots/mm)
Color Graduation 256 color graduation for each color (16,700,000 colors).
Warm-up time 45 seconds or less (when the room temperature at 20 ºC).
Important • It may take more than 45 seconds when optional fax kits are
installed or due to the network environment configuration.
Copy document The maximum size is 297 × 432 mm (A3, 11 × 17 inch) for both
sheets and books.
Copy (sheet) size [Paper Tray - 4]
Maximum: A3 (297 × 432 mm) or
11 × 17 inch (279 × 432 mm).
Minimum: A5 (148 × 210 mm)
[bypass tray]
Maximum: 12.6 × 17.7 inch (320 × 449.6 mm) or
12 × 18 inch (304.8 x 457.2 mm)
Maximum: postcard (100 × 148mm) or
envelope (120 × 235 mm)
Non-standard size:
X direction (horizontal) 100 to 483 mm,
Y direction (vertical) 100 to 305 mm (When
copying both sides on a non-standard size paper,
specify the size within the range from 148 to
432 mm for the X (horizontal) direction and from
140 to 297 mm for the Y (vertical) direction.)
Image loss width:
First 4mm or less, last 2 mm or less,
and top/front 2 mm or less.
Important • Copying may not be performed correctly when the X
(horizontal) direction of a non-standard size paper is less
than 140 mm.
Copy paper Paper Tray 1 - 4 : 64 - 169 g/m
2
Paper Tray 5 (Bypass) : 55 - 220 g/m
2
Important • It is recommend using Xerox recommended papers.
Copying may not be performed correctly depending on the
deployment conditions.