Fuji Xerox Document Centre C360 - Job Flow Procedure; Step 1 Opening the [Job Flow Sheets] Screen; Step 2 Selecting a Job Flow; Step 3 Confirming;Changing a Job Flow

7 Job Flow Sheets
198
Job Flow Sheets
7
Job Flow Procedure
Job Flow procedure steps and their references are listed below.
Step 1 Opening the [Job Flow Sheets] Screen..........................................................................198
Step 2 Selecting a Job Flow......................................................................................................198
Step 3 Confirming/Changing a Job Flow..................................................................................198
Step 4 Starting a Job Flow ........................................................................................................199
Step 1 Opening the [Job Flow Sheets] Screen
Follow the procedure below to open the [Job Flow] screen.
Note • Features displayed may vary from device model to model.
1 Press the <All Services> button.
2 Open the next screen, and select
[Job Flow Sheets].
Step 2 Selecting a Job Flow
1
Select a Job Flow.
For more information about [Job Flow
Sheets] screen, refer to "Job Flow List"
(P.200).
Step 3 Confirming/Changing a Job Flow
1
Select a Job Flow.
2 To confirm Job Flow contents,
select [Show Details]. To change
contents, select [Edit].
For more information about configuring
and changing Job Flow, refer to
"Confirming/Changing Job Flow" (P.201).
123
456
789
0 #
C
<All Services>
button