Fuji Xerox Document Centre C360 - Checking Executing;Pending Jobs

Checking Executing/Pending Jobs
357
Job Status
12
Checking Executing/Pending Jobs
This section describes how to check executing or pending jobs. In the status screen,
you can cancel jobs, or preferentially execute jobs.
1 Press the <Job Status> button.
2 Check the executing/pending job.
Note • Select [ ] to display the
previous screen and select
[ ] to display the next screen.
3 To cancel or preferentially execute
a job, select the job.
4 Select [Stop] or [Promote Job].
Stop
Cancels the executing or pending job.
Promote Job
Promotes the job to be run after the currently executing job. Note, however, that if after
using [Promote Job], you continue, to use [Promote Job] for another job, the later
promoted job will be promoted ahead of the earlier promoted job and in the [Current
and Pending Jobs] screen will have a mark by [Status].