5 Scan
164
Scan
5
From
Enter an e-mail address. Select [Address Book] and select from the Address Book, or
select [Keyboard] and enter a value using the keyboard.
You can specify a recipient in only 1 place. Up to 128 characters are allowed.
Note • When using the Authentication feature, the e-mail address registered for the user
information is automatically set.
E-mail Subject
Enter the Subject. When using Auto Configuration, the Subject is [Scan data from XXX]
(where XXX is the host name). Auto Configuration is the default setting. 128 characters
are allowed.
Reply To
Set the e-mail address to reply to.
File Name
Select [Keyboard] and enter a value using the keyboard.
Clear Field
Deletes the From address.
Enter Sender’s Address
Sets the [Reply To] address to the From address.
Address Book
Enter an e-mail address from the Address Book.
Keyboard
Use the Keyboard to enter an e-mail address.