Fuji Xerox Document Centre C360 - Page 299

Scan Mode Settings
297
Setups
11
Original Type
Set the default value for [Original Type] in the [Basic Scanning Tab] screen.
File Format
Set the default value for [File Format] in the [Basic Scanning Tab] screen.
Lighten/Darken
Set the default value for [Lighten/Darken/Contrast] > [Lighten/Darken] in the [Image
Quality] screen.
Contrast
Set the default value for [Lighten/Darken/Contrast] > [Contrast] in the [Image Quality]
screen. The contrast setting is valid when [Output Color] is set to [Full Color] or
[Grayscale].
Sharpness
Set the default value for [Sharpness] in the [Image Quality] screen.
Auto Exposure
Set the default value for [Auto Exposure] in the [Image Quality] screen.
Background Suppression
Set the default value for [Background Suppression] in the [Image Quality] screen.
Color Space
Set the default value for color space in the [Image Quality] screen.
Original Orientation
Set the default value for [Original Orientation] when scanning.
Scan Resolution
Set the default value for [Scan Resolution] in the [Scan Options] screen.
You can select from 200 dpi, 300 dpi, 400 dpi, and 600 dpi.
Mixed Size Originals
Set the default value for [Mixed Size Originals] in the [Scan Options] screen.
Note • This feature does not appear for some models. An optional package is necessary. For more
information, contact our Customer Support Center.
Border Erase
Set the default value for [Border Erase] in the [Scan Options] screen. You can select
from [Normal] or [Variable Erase].
Border Erase - Top & Bottom
Set the default value for the amount of border erased from the original in the top and
bottom directions in [Border Erase] in the [Scan Options] screen. Set a value from 0 to
50 mm, 1 mm increments.