Billing Meter/Print Report
383
Machine Status
13
Multi-poll Report
You can check the results of multi-poll transmissions. The remote terminal name and
transmission result/status is recorded.
If this is set to be automatically printed, it is automatically printed when the multi-poll
transmission completes.
For information about how to set whether this should be automatically printed, refer to "Broadcast/Multi-
Poll Report" (P.267).
Relay Broadcast Report
You can check the results of a relay broadcast.
If this is set to be automatically printed, it is automatically printed when the relay
broadcast completes.
For information about how to set whether this should be automatically printed, refer to "Relay Broadcast
Report" (P.267).
To Next Page