EasyManua.ls Logo

Fuji Xerox Document Centre C360 - Page 475

Fuji Xerox Document Centre C360
556 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Error Code
473
Problem Solving
16
116-702
[Cause] Printing was performed using a substitute font.
[Remedy] Check the print data.
116-703
[Cause] An error occurred during PostScript (optional)
processing.
[Remedy] Either confirm the print data, or click [Spool Settings] on
the [Details] tab in the print driver to set bi-directional
communications off.
116-710
[Cause] A probable cause is that the correct document size could
not be judged as the receive data exceeded the HP-GL/2
(optional) spool size.
[Remedy] Increase the size assigned to HP-GL/2 auto-layout
memory.
116-713
[Cause] Job was divided and printed due to insufficient disk
space.
[Remedy] Remove unnecessary data from the hard disk to
increase free disk space.
116-714
[Cause] An HP-GL/2 (optional) command error occurred.
[Remedy] Check the print data.
116-720
[Cause] An error occurred during printing as there was
insufficient memory.
[Remedy] Stop unnecessary ports, remove unnecessary data from
the hard disk to increase free disk space.
116-740
[Cause] Numerical value operation error occurred as a value
exceeding the value limit of the printer was used in the
print data.
[Remedy] Check the print data.
116-747
[Cause] There are too many paper margin values for the HP-GL/
2 (optional) effective coordinate area.
[Remedy] Reduce the paper margin values, and instruct it to print
again.
116-748
[Cause] There is no plot data in the HP-GL/2 (optional) print data.
[Remedy] Check the print data.
116-749
[Cause] Job cancelled because the specified font was
unavailable.
[Remedy] Install the font, or setup font replacement on the print
driver side.
116-771
116-772
116-773
116-774
116-775
116-776
116-777
116-778
[Cause] There was a problem with the parameters in the data.
They were automatically edited.
[Remedy] The printed image might not be complete. Check with
the other party, or ask for a resend. When using the
Internet Fax (iFax) feature, check with the mail recipient.
116-780

[Cause] There is a problem with the document attached to the
received mail.
[Remedy] Check the attached document.
Error Code
Category
Cause and Remedy
CPFSMO

Table of Contents