Figure 96: Removing the 24x 2.5-inch HDD backplane and the switch board
▶
Release the screws (see blue circles).
▶
Pull the HDD backplane upward until the six hooks disengage (see orange
circles).
▶
T
ake out the HDD backplane with the switch board.
Installing the new 24x 2.5-inch HDD backplane and the switch board
Figure 97: Installing the 24x 2.5-inch SAS HDD backplane and the switch board
Hard disk drive (HDD) / solid state disk (SSD)
200 Upgrade and Maintenance Manual RX2540 M7
To Next Page
Loading...
