Fujitsu PRIMERGY TX1320 M4 - Concluding Steps; Removing a Hot-Plug PSU; Preliminary Steps

108 Upgrade and Maintenance Manual TX1320 M4
Power supply unit (PSU)
6.3.1.4 Concluding steps
Ê "Connecting the power cord" on page 60
Ê "Performing a fan test" on page 94
6.3.2 Removing a hot-plug PSU
6.3.2.1 Preliminary steps
Ê Only when replacing a PSU in a non-redundant configuration: "Shutting
down the server" on page 49.
Ê Remove the power cord from the hot-plug PSU, see section "Disconnecting
the power cord" on page 50.
Customer Replaceable Unit
(CRU)
Hardware: 5 minutes
Tools: tool-less