Fujitsu PRIMERGY TX1320 M4 - Replacing the ODD; Preliminary Steps; Removing the Defective ODD; Installing the New ODD

250 Upgrade and Maintenance Manual TX1320 M4
Accessible drives
12.2.3 Replacing the ODD
12.2.3.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Removing backup and optical disk media" on page 69
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 51
12.2.3.2 Removing the defective ODD
Ê Remove the ODD, see section "Removing the ODD" on page 246.
12.2.3.3 Installing the new ODD
Ê Install the ODD, see section "Installing the ODD" on page 241.
12.2.3.4 Concluding steps
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 60
Ê "Switching on the server" on page 63
Ê "Resuming BitLocker functionality" on page 87
Field Replaceable Unit
(FRU)
Hardware: 15 minutes
Tools: Phillips PH1 / (+) No. 1 screw driver