Fujitsu PRIMERGY TX1320 M4 - Removing a Memory Module; Preliminary Steps

TX1320 M4 Upgrade and Maintenance Manual 213
Main memory
10.3 Removing a memory module
10.3.1 Preliminary steps
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 51
10.3.2 Removing a memory module
Figure 116: Removing memory modules (A)
Ê Eject the desired memory module by pressing out the securing clips at each
end of the memory slot.
Figure 117: Removing memory modules (B)
Ê Remove the ejected memory module.
Upgrade and Repair Unit
(URU)
Hardware: 5 minutes
Tools: tool-less