TX1320 M4 Upgrade and Maintenance Manual 263
13.1.1.1 Preliminary steps
Ê "Locating the defective server" on page 47
Ê "Suspending BitLocker functionality" on page 67
Ê "Shutting down the server" on page 49
Ê "Disconnecting the power cord" on page 50
Ê "Getting access to the component" on page 51
13.1.1.2 Removing the front panel module
Figure 156: Removing the front panel module
Ê Disconnect the front panel cable from the front panel module (1).
Ê Disengage the retention hooks using a flat screw driver of the front panel
module (see arrows).
Ê Remove the front panel module.
To Next Page
Loading...
