160 Upgrade and Maintenance Manual TX1320 M4
Hard disk drives (HDD) and solid state drives (SSD)
7.4.8.4 Installing additional HDD/SSD modules
Figure 71: Removing the HDD cover
Ê Press in on both release latches (1) and remove the HDD cover (2).
Ê Insert additional HDD/SSD modules, see section "Installing 2.5-inch
HDD/SSD modules" on page 144.
7.4.8.5 Concluding steps
Ê Install two HDD fan modules, see section "Installing the HDD fan module"
on page 167.
Ê "Reassembling" on page 57
Ê "Connecting the power cord" on page 60
Ê Update the system information of your server using the Chassis ID Prom
Tool, see section "Using the Chassis ID Prom Tool" on page 91. Select the
corresponding system name.
Ê "Switching on the server" on page 63
Ê "Performing a RAID array rebuild" on page 87
To Next Page
Loading...
